AT&T DLP73410 - Call Block Settings; Set Smart Call Blocker On;Off

99
Smart call blocker
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by
default.
1. Press CALL BLOCK on the handset or telephone
base to enter the call block menu when the
telephone is not in use.
- OR -
Press MENU/SELECT to enter the main menu
when the handset is not in use. Then, press CID
or DIR to scroll to Smart call blk. Press
MENU/SELECT.
2. Press MENU/SELECT again to select SCB On/Off.
3. Press CID or DIR to highlight On or Off, then
press MENU/SELECT to save the setting. You hear
a confirmation tone.
Note: If you set SCB On/O to O, all settings under Set prole (see
below) will be invalid.
Smart call blk
ECO
SCB On/Off
ECO