AT&T DLP73410 - Change a One-To-One PTT Call to an Intercom Call; Answer an Incoming Call During a PTT Call

75
Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your device shows Press [PTT] Talk, press MENU/SELECT. The screen
shows Intercom.
2. Press MENU/SELECT. Your device displays Calling base or Calling HS X. The
destination device shows HANDSET X is calling or BASE 0 is calling. The
destination device rings.
3. Press HOME/FLASH, CELL or /SPEAKER on the destination handset, or
press /HOME or /CELL on the telephone base to answer the intercom
call. Both devices now show Intercom.
4. To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the telephone base or charger, or press CANCEL on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
f During a one-to-one PTT, press HOME/FLASH, CELL, or /SPEAKER on
the initiating or destination handset. The PTT call ends automatically and the
outside call is answered.
f During a one-to-group PTT call, press HOME/FLASH, CELL, or
/SPEAKER on the initiating handset, or /HOME on the initiating
telephone base. The PTT call ends automatically and the outside call is
answered.
f During a one-to-group PTT call, press HOME/FLASH on any one of the
destination handsets, or press /HOME on the destination telephone base.
That device answers the outside call. The PTT call continues for the rest of
the PTT participants.
f To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.