AT&T DLP73410 - Remove a Paired Device; Download Directory

28
Bluetooth
Bluetooth setup
Remove a paired device
When you already have 2 devices on the device list and you want to add another
device,youmustrstdeleteonefromthelist.Youcanonlypair2cellphonesor
one cell phone and one Bluetooth headset.
To remove a paired device:
1. Press MENU/SELECT on the telephone base in idle mode to enter the main
menu.
2. Press CID or DIR to highlight Bluetooth, then press MENU/SELECT.
3. Press CID or DIR to highlight Device list, then press MENU/SELECT.
4. Press CID or DIR to highlight the desired device, then press X/DELETE.
-OR-
f Press CID or DIR to highlight the desired device, then press
MENU/SELECT .
f Press CID or DIR to highlight Remove, then press MENU/SELECT .
5. The telephone base displays Remove Headset X? (Headset X represents
the device name of your Bluetooth headset). Press MENU/SELECT toconrm.
The telephone base displays Device removed from device list and you
hearaconrmationtone.
Download directory
You can download cell phone directory (phonebook) entries to your
DLP73210/DLP73410/DLP73440/DLP73450/DLP73510/DLP73540 telephone
system via Bluetooth wireless technology. Each downloaded cell phone
directory entry are stored in the telephone directory with up to 30 digits for
each phone number and 15 characters for each name.
Before downloading a directory, make sure the cell phone is paired, active, and
connected to your telephone system.
Place your cell phone next to the telephone base when you download a cell
phone directory to your telephone system.
To download a cell phone directory:
1. Press MENU/SELECT on the telephone base in idle mode.
2. Press CID or DIR to highlight Bluetooth, then press
MENU/SELECT .
Intercom
>Bluetooth