AT&T DLP73410 - Page 120

114
Smart call blocker
Call block settings
Reset all your screening announcements:
1. Press CALL BLOCK on the handset or telephone base to enter the call block
menu when the telephone is not in use.
- OR -
Press MENU/SELECT to enter the main menu when the handset is not in use.
Then, press CID or DIR to scroll to Smart call blk. Press MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset annc?. Press MENU/SELECTagaintoconrm.Thescreen
shows Annc reset. before returning to the previous menu.
Your name will be deleted from all the screening announcements, and the
telephone will use the default screening announcements described on page
112.