AT&T DLP73410 - Troubleshooting

142
Appendix
Add and register handsets/headsets
If registration fails, the system will automatically try to register again. If
registrationfailsaerthethirdtry,Registration failed appears on the handset
screen. The handset shows To register HS... and ...see manual, and the
telephonebasereturnstoidlemode.Thismaytakeuptoveminutestooccur.
Please start again from Step 1.
Notes:
f You cannot register a handset if any other system handset is in use.
f If you try to register more than ve handsets to the telephone base, the telephone base shows Registration slots
are full and sounds two beeps..