AT&T DLP73410 - Page 56

50
Telephone settings
Telephone base settings
Key tone
The telephone base is set to beep with each key press. You can adjust the key
tonevolumeorturnito.Ifyouturnothekeytone,therearenobeepswhen
you press keys.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Key tone, then press
MENU/SELECT.
4. Use qCID or pDIR to select the desired volume
or O.
5. Press MENU/SELECT to save your preference. There is a
conrmationtoneandthescreenreturnstotheprevious
menu.
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps, as mentioned below, to
turn the CID time syncfeatureonoro.ThedefaultsettingisOn.
1. When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to CID time sync, then
press MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off, then press
MENU/SELECT to save. There is a confirmation tone and
the screen returns to the previous menu.
Clr voicemail
> Key tone
KEY TONE
LCD language
>CID time sync
CID TIME SYNC
>On