52
Telephone settings
Telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to highlight Touch-tone or Pulse, then
press MENU/SELECT. The screen shows
DIAL MODE is touch-tone or DIAL MODE is pulse.
There is a confirmation tone and the screen returns to the previous menu.
DIAL MODE
>Touch-tone
Home area code
>Dial mode
To Next Page
Loading...
