AT&T DLP73410 - Page 74

68
Multiple handset use
Call transfer using intercom
Using the telephone base:
1. When on an outside call, press INT on the
telephone base.
- OR -
When on an outside call, press MENU/SELECT on
the telephone base, then press CID or DIR to
highlight Intercom. Press MENU/SELECT .
2. The call is automatically put on hold. Press
CID or DIR to select a device. The handset
shows Calling HS X (X represents the handset
number). The destination handset rings and
shows Base is calling.
3. To answer the intercom call on the other device,
press HOME/FLASH, CELL or /SPEAKER on
the destination handset. T he outside call is still
on hold. Both devices now show Intercom.
4. To transfer the call, press MENU/SELECT on the
telephone base, and then scroll to Transfer, then press MENU/SELECT. The
other handset automatically connects to the outside call.
- OR -
The called party can end the intercom call by pressing CANCEL on the
telephone base. The outside call continues with the telephone base.
Notes:
f If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press
OFF/CANCEL on the originating handset or press CANCEL on the originating telephone base.
f If the called device does not answer the intercom call within 100 seconds, or if the device is in use, on a call or out of
range, the initiating telephone base displays No answer, try again, or the initiating handset displays Unable
to call, and returns to the outside call.
f You can press OFF/CANCEL or MUTE/DELETE on the destination handset, or press CANCEL on the
telephone base to temporarily silence the intercom ringer.
f Only one intercom call can be established at a time.
INTERCOM TO:
> HANDSET 1
Calling
HANDSET 1