Features
To Transfer to an Inside Extension
Using One-Touch Transfer
If your system is programmed for One-Touch Transfer, it is
also programmed either for automatic completion or manual
completion. Automatic completion sends the call directly to
the extension. Manual completion lets you consult with the
person, if you wish, before sending the call.
With automatic completion:
1. Check the light next to the Auto Dial button for the
person’s extension.
■ If the light is on, the person is unavailable.
See “Handling an Unsuccessful Transfer” in this section.
■ If the light is off, go to Step 2.
2. Press the button for the person’s extension.
The call is transferred automatically.
With manual completion:
1. Check the light next to the Auto Dial button for the
person’s extension.
■ If the light is on, the person is unavailable.
See “Handling an Unsuccessful Transfer” in this section.
■ If the light is off, go to Step 2.
2. Press the button for the person’s extension.
The call is put on hold and the extension is dialed automatically.
3. For a transfer without consultation, hang up.
The call is transferred.
4. For a transfer with consultation, announce the call.
Transfer
5-77
To Next Page
Loading...
Need help?
General
