Features
3. Press the Auto Dial button or dial the person’s
extension.
4. For a transfer without consultation, hang up.
5. For a transfer with consultation, announce the call.
■ If the person accepts the call, hang up.
The call is transferred.
■ If the person does not accept the call, press the
line button with the held call to return to the call.
If your system is not programmed for One-Touch Transfer,
you can use the following alternative method for transferring
an outside call only to a co-worker whose phone has the
same line buttons as your phone:
1.
Check the light next to the Auto Dial button for the
person’s extension.
■ If the light is on, the person is unavailable.
See “Handling an Unsuccessful Transfer” in this section.
■ If the light is off, go to Step 2.
2. Press the button for the person’s extension.
The call is put on hold and the extension is dialed automatically.
3.
Announce the line that the call is on.
■ If the person accepts the call, hang up.
He or she can answer the call by pressing the button with
the call.
■
If the person does not accept the call, press the
line button with the held call to return to the call.
5-76
Transfer
To Next Page
Loading...
Need help?
General
