Features
NOTE:
■ You must have an available SA or ICOM button to
transfer a call using an Auto Dial button. When
you press an Auto Dial button to transfer a call, the
system automatically selects an SA or ICOM
button for the transfer.
If an SA Voice or ICOM Voice button is selected
for a transfer with consultation, the transfer is
called a voice-announced transfer. The person to
whom you are transferring will hear your voice on
his or her speakerphone after a beep.
To Transfer to an Inside Extension
without Using One-Touch Transfer
Whether or not your system is programmed for One-Touch
Transfer, you can transfer an inside or outside call to an inside
extension as follows:
1. If your phone has Auto Dial buttons, check the light
next to the button for the person’s extension.
■ If the light is on, the person is unavailable.
See “Handling an Unsuccessful Transfer” in this section.
■ If the light is off, go to Step 2.
2. Press Transfer.
The call is put on hold automatically and the system selects an SA or
ICOM button.
Transfer
5-75
To Next Page
Loading...
Need help?
General
