Features
To Prevent Coverage of Inside Calls
1. Press Feature and dial 00.
2. Press any ICOM or SA button.
3. Do one of the following:
■
■
4. Press
NOTE:
Dial ✱✱ 48 to prevent inside calls from going to
any kind of Coverage.
Dial ✱ 48 to send both inside and outside calls
to Coverage.
Feature and dial ✱ 00.
This feature does not require a programmed button.
Once you have dialed ✱✱ 48 only your outside calls are
covered. This remains in effect until you repeat this
procedure and dial ✱ 48 to send all your calls to
Coverage.
To Program a Coverage VMS Off
Button
1. Label the button to be programmed as
Coverage VMS Off.
2. Press Feature and dial 00.
3. Press the button you labeled Coverage VMS Off.
4.
Dial
✱
46.
5. Press Feature and dial ✱ 00.
5-22 Coverage
To Next Page
Loading...
Need help?
General
