AT&T Partner Series - Page 92

Line ringing, 3-1, 3-4
Lines, testing during installation, 2-7
Loudspeaker paging systems, 1-4, 2-13
Restricting outgoing calls, 3-2
Retrieving a held call, 4-7, 5-3
Ringer Equivalence Number (REN), 1-5
Ringing patterns, 4-2, 5-2
RJ11 jack, 1-5, 2-1, 2-6
Rotary service, 2-12
M Rotary telephones, see Standard Phones
Maintenance, modules and telephones, 8-1
Making calls, 4-6 to 4-7, 4-9, 5-2, 5-4
Message indicator, 4-1
Microphone (Mic) button, 4-1, 4-3
MLS-model phones, see PARTNER phones
Modems, 1-3, 1-4, 2-12, 6-11
Module connector, 1-2, 1-5, 2-5
Modules, see 206 Modules
Mounting hardware on a wall, 1-5, 2-4 to 2-5, 2-10
Mounting cords, telephone, 2-9 to 2-10, 2-12, 2-13
N
Network interface jacks, 2-1, 2-6
Notify feature, fax machine, 6-6
O
Outgoing Call Restriction, 3-1, 3-2
Outside call, making, 4-6, 5-2
P
Paging systems, 1-4, 2-13
PARTNER phones
buttons and lights, 4-1 to 4-2
call handling with, 4-5 to 4-10
calling features, 4-11
descriptions, 1-2
installation, 2-9 to 2-13
ordering additional, C-2
power failure operation, 2-3
ringing patterns, 4-2
speaker and microphone, 4-3, 4-5
specifications, 1-5
testing, 2-11
PARTNER Plus system, upgrading to, E-1 to E-2
Pause function, 3-7
PBX system, 2-12, A-1
Power failure, preparing for, 2-3
Power failure transfer (PFT) jacks, 2-3
Privacy feature, 4-11
Problem solving, 7-1 to 7-8
Programming, see Customizing the system; Storing
R
Recall feature, 4-11, 5-5
Recall function stored in dial sequence, 3-7
Recall Timer Duration, 7-5
Repair, in-warranty and post-warranty, 8-2
Replacement parts, ordering, C-1 to C-2
Requirements, installation, 1-5
Reset, system, 7-8
S
Settings, changing factory, 3-2 to 3-4
Single-line devices, 1-3 to 1-4, 2-12 to 2-13
Speaker (Spkr) button, 4-1, 4-3
Speakerphone, 4-3, 4-5
Special functions, 3-7
Specifications, 1-5
Speed Dial, 3-5, 4-6, 5-5, B-1
Standard devices, 1-3 to 1-4, 2-12 to 2-13
Standard phones
connecting, 2-12 to 2-13
changing line selection for, 3-3, 5-1
limitations, 1-3, 5-1
description, 1-3 to 1-4
using with system, 5-1 to 5-6
Stop function, 3-7
Storing
Auto Dial numbers, 3-6, 4-4
Speed Dial numbers, 3-5
Strobes, 2-12
Switch fabric, 1-5
Switchhook, using on standard phone, 5-1
System reset, 7-8
SYSTIMAX wiring, 1-5
T
Technical specifications, 1-5
Telephone cords, connecting, 2-6, 2-8
Telephones, see PARTNER phones; Standard phones
Temperature, 1-5
Testing the modules and incoming lines, 2-7
Touch-Tone Enable function, 3-7
Touch-tone service, 2-12
Touch-tone telephones, see Standard Phones
Transfer button, 4-1
Transferring a call, 4-8, 5-3, 6-6
Troubleshooting, 7-1 to 7-8
W
Warranty, AT&T Limited, 8-3, 8-4
Weights, 1-5
Wiring, 2-1 to 2-3, 2-6, 2-8
IN-2