AT&T Syn248 SB35020 - Cordless Accessory Registration and Deregistration Time-Out

Syn248 Installation and Configuration Guide Back to Contents
Installation 33
The cordless headset ON/OFF light slowly flashes.
4. Press . The User Settings menu appears.
Cordless Accessory Registration and Deregistration Time-Out
For security reasons, the registration process on both Deskset and cordless accessory
terminates after the time-out period of two minutes if registration is not successful.
If the registration process times out, the Deskset it displays Registration Failed and
returns to the Cordless Headset menu.
If cordless headset registration fails, remove the headset from the charger and try the
registration process again, beginning with Step 1, “To register the cordless headset:” on
page 30 or page 31.
Cordless Headset Registration
Cordless Headset is currently
Not Registered
Register Exit
Place Cordless Headset in charger.
Press Register to begin process.
Quick
Dial
Exit
If the cordless device is registered to another Deskset, it must be deregistered
first. See “Deregistering a Cordless Headset” on page 32.