AT&T Syn248 SB35020 - Setting the Current Auto-Attendant

Syn248 Installation and Configuration Guide Back to Contents
System Configuration 46
Figure 17. Day Menu Example
Setting the Current Auto-Attendant
To set the current Auto-Attendant:
1. On the Operator Deskset, press (MENU), then 5 to display the Auto-Attendant
menu.
2. SB35031 Deskset — Highlight the desired menu, then press .
SB35020/SB35025 Deskset — Press
 or  to select the current menu: Default
Menu, Day Menu, or Night Menu.
3. Press to save the setting.
Set?
Auto Attendant Settings
1. Default Menu
3. Night Menu
2. Day Menu
Quick
Dial
Use or to scroll or press 1-3.
Press Set? then press Save.
[Set]
Save Set?
SB35031 Deskset SB35025/SB35020 Deskset
Save