Syn248 Installation and Configuration Guide Back to Contents
System Configuration 36
Accessing the Administrator WebUI
WebUI information for Deskset users is contained in the “Web Interface” chapter
of the SB35020/SB35025 Deskset User's Guide and the SB35031 Deskset User’s
Guide at
smbtelephones.att.com.
To access the WebUI and log on:
1. Ensure your computer is connected to the same IP subnet as the Syn248 system. The
easiest way to ensure this is to connect your PC to the PC port on the back of a
Deskset with an Ethernet cable.
2. On the Deskset, press (
MENU
) then
4
. The
Deskset Information
screen appears.
3. Find the IP Address on the Deskset Information screen.
4. On your computer, open an Internet browser.
5. In the browser address bar, type the Deskset IP Address and press ENTER on your
computer keyboard.
The Login page appears.
Only one person at a time should log on as the system administrator to
prevent unintentional overwriting of changes.
'HVNVHW,QIRUPDWLRQ
0RGHO1R6%
6WDWXV6\QFKURQL]HG
,3$GGUHVV
Deskset Information
Quick
Dial
Model No: SB35031
Status: Synchronized*
IP Address: 192.168.0.10
MAC Address: 00:11:A0:11:EA:4D
Serial No: GG20013043
Boot Ver: 2.7.1
P Firmware Ver: 1.3.
Exit
Use or to scroll. Press Exit when
done.
SB35031 Deskset SB35025/SB35020 Deskset
You can also use a Gateway IP address (shown in Figure 22 on page 85) to
log on to the WebUI.
To Next Page
Loading...
