Syn248 Installation and Configuration Guide Back to Contents
System Configuration 37
6. Enter admin in the Login Name field and 12345 in the Password field, then click
. You can change the Admin ID and password once you have logged on.
The System Information page appears.
The System Information page displays the count of Desksets and Gateways. You can
also expand the System Information page to display Detailed System Information,
which lists information specific to each installed device (such as the IP Address and
Software Version).
Click topics from the navigation menu on the left side of the WebUI to see them. You
view and change settings in two different types of fields: drop-down lists and entry fields
into which you type information. For your security, the WebUI times out after 10 minutes.
If it is idle for that time, you must log on again.
The remaining procedures in this chapter assume that you have already logged on to the
WebUI as administrator.
In most cases there are multiple settings on one page. Changing a setting does
not instantly apply the new value. Click on the WebUI to save all
changes on that page.
Changes made on the WebUI are transmitted to all connected devices when
applied. If changes are being made at the Deskset and WebUI simultaneously, a
first-come-first-served policy applies. System configuration changes are transmitted
globally when you press on the Deskset or click on the WebUI.
To Next Page
Loading...
