Syn248 Installation and Configuration Guide Back to Contents
System Configuration 53
Configuring Phone Line CFNA
On the Phone Line CFNA (Call Forward–No Answer) page, you can specify how to
forward calls that do not get answered. You can set a CFNA destination for each
telephone line connected to the Gateway.
If your telephone lines are part of a hunt group (a telephone company feature that allows
calls to a busy phone number to roll over to the next available telephone line), then it is
recommended to set the same CFNA destination for all lines in that group.
To configure CFNA settings:
1. In the navigation menu at left, click Phone Line CFNA. The Phone Line Call
Forward No Answer page appears.
2. Select a line. The lines are listed along with their names. See “Line Naming” on
page 58.
3. Select a Call Forward–No Answer Target for the line.
Off. The line rings until the call is answered or the caller hangs up.
Voicemail. The unanswered call is directed to the selected extension’s
voicemail.
To Next Page
Loading...
