Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 89
Deskset Admin Settings
You can use the Deskset Admin Settings to set up the system features described in
Table 3. The WebUI also provides an interface for setting up your system. See “Accessing
the Administrator WebUI” on page 36.
To display the Admin Settings menu:
1. On the Deskset, press (MENU) then 3.
2. Enter the Admin password, and press (SELECT).
The Admin Settings screen appears as shown in Figure 25.
The default Admin password is 12345. To change this password, see “Changing the
System Basic Settings” on page 39.
Figure 25. Admin Settings Screen
The Admin Settings menu contains the items listed in Table 3.
Table 3. Admin Settings Menu
Menu Item See...
1. Intercom CFNA page 90
2. Fwd/Trans to line page 91
3. IP Settings page 92
4. Reset User Password page 94
5. Software Upgrade page 94
6. Set Time and Date page 95
1. Intercom CFNA
3. IP Settings
2. Fwd/Trans to line
Use or to scroll then press
SELECT or press 1-.
Quick
Dial
4. Reset User Password
5. Software Upgrade
(Mailbox)
(Enabled)
(Auto)
SB35031 Deskset SB35025/SB35020 Deskset
To Next Page
Loading...
