Syn248 Installation and Configuration Guide Back to Contents
Installation 6
C HAPTER
1
I
NSTALLATION
This section describes the physical installation of the Syn248 devices. Each system must
include at least one Gateway and one Deskset. Each Gateway supports up to four analog
telephone lines.
“System Overview” on page 7
“Recommended Installation Sequence” on page 10
“Site Preparation” on page 11
“Assigning Telephone Lines and Extensions” on page 13
“Gateway Placement” on page 15
“Connecting the Gateway” on page 17
“Deskset Installation” on page 19
“Cordless Headset Installation and Registration” on page 30.
Visit the AT&T SMB Telephony
Video Gallery to watch the Syn248 installation video.
To Next Page
Loading...
