Syn248 Installation and Configuration Guide Back to Contents
System Configuration 52
Creating a Paging Zone with Overhead Paging
An overhead paging (OHP) system issues a one-way broadcast to all overhead speakers.
These speakers cannot be grouped into separate zones. A single OHP system can be
connected to the AUX I/O port of an SB35025 Deskset. This OHP system is automatically
included when you page “All Extensions”.
To create a single overhead paging zone:
1. Follow the instructions in “Creating, Editing and Deleting Paging Zones” on page 55
to either Create New Paging Zone, or View/Edit an existing Paging Zone.
2. Select Overhead Page from the Available Members list and click .
3. Click to save these settings or click to return to the previous page
without saving the changes.
To Next Page
Loading...
