ATCOM IP2G4A - Configured Phones

IPPBX IP2G4A User Manual
~ 65 ~ ATCOM TECHNOLOGY CO., LIMITED
You can upload a phonebook before auto provision, which will be provisioned to the IP phone when using
auto provision feature to configure your IP phones. The format of phonebook should be *.xml.
NOTE: All the existing phonebooks of the IP phone will be replaced automatically if the phonebooks are
configured in this way.
2)Ring Tone
You can upload a Ring Tone before auto provision, which will be provisioned to the IP phone when using
auto provision feature to configure your IP phones.
NOTE: Ring tone must be wav file, 8k sampling rate, 8 Bit u-law compression. File size should < 200Kbytes.
3)Firmware
You can upload a firmware before auto provision, which will be provisioned to the IP phone when using auto
provision feature to configure your IP phones.
NOTE: the file format must be .fw
11.2.2 Configured Phones
Create New Phone
Enable
Enable auto provisioning for this phone
Phone Type
Choose the Phone Type
MAC Address
Input the MAC address for the phone
New Version
Make sure your phone is with the newest version. If yes, IPPBX will generate the configuration file for IP phone.
Manufacturer
Choose the manufacturer.
DND
Enable or Disable DND.
Call Waiting
Enable or Disable Call Waiting.
Auto Answer
Enable or Disable Auto Answer.