ATEL V810 Series
V810A Data User Manual
V6.1, January 3, 2023
l IP Address:
Enter the IP address of your V810A online management portal (factory default: 192.168.0.1).
l Subnet Mask:
An address code that determines the size of the network. Normally use 255.255.255.0 as
the subnet mask.
l MAC Address:
It is written to the device at the time of manufacture.
l DHCP Lease Time:
The Lease Time is the amount of time a network user will be allowed connection to the
router with their current dynamic IP address. Enter the amount of time in minutes and the
user will be "leased" this dynamic IP address. After the time is up, the user will be assigned
a new dynamic IP address automatically.
l Start DHCP Address Range at:
Specify an IP address for the DHCP server to start with when assigning IP addresses. The
default start address is 192.168.0.2.
l Reserve IP Address:
Yo u c a n r e s er v e a n I P a d d r e s s s o t h a t i t i s a l w a y s a s s i g n e d t o t h e s a m e c o n n e c t e d d e v i c e.
Every reserved IP address must be within the range of IP addresses used by DHCP.
Device Settings
Device Preferences
l UPnP (Universal Plug and Play):
UPnP (which stands for Universal Plug and Play) is a feature that allows the devices on
your home network to discover each other and access certain services. If you don't use
applications that need port forwarding, such as peer-to-peer applications, game servers,
and many VoIP programs, you may be better off disabling UPnP entirely.
l Power Save:
If it’s set to ON, Wi-Fi Hotspot will be shut down when your V810A is not connected to a
wall adapter.
l Enable LCD Sleep
Set the time of the LCD screen to sleep automatically. The default is “After 30 seconds”,
you can set to 15 seconds, 2 minutes, and never turn off the screen.
To Next Page
Loading...
