QSG_F28+.394.00_EN_01 / 2019-02-25
37 / 42
Label Function Description
DUMP OFF
Dump off Disable the dump phase in the program
parameters
END OF CYCLE
End of cycle Several automatism case depending on fail part
management
EXT. DUMP
External dump The test part is vented to atmosphere through an
external valve
FILL MODE
Fill types Special filling methods
FILTER
Filtering Stabilize the measurement values
FLOW LEVEL
Flow level Add a minimum fail parameter
MINI-VALVE
Mini valve Access to highest time resolution (fast test) and
auto zero time
NAME
Name Program customization
NO NEGATIVE
No Negative Replace negative value per 0
N TESTS
N TESTS Repeats the test when the results get close to the
reject level
PEAK HOLD
Peak hold Give as result, the highest flow during the test
time
PR:SEQUENCE
Sequencing Allowed program automatic sequencing
PRE-FILL
Pre-fill types Special filling methods
PRESSURE DROP
Pressure drop Pressure drop mode function in the Desensitized
mode
REF. VOLUME
Reference volume Adjust the reference volume value with flow
units only
REWORK LIMIT
Rework limits Additional levels for specific reworkable parts
Sd Part
SD PART 2
SD PART 3
Sealed part Several optional ways to test sealed parts
SEALED DIFF
Sealed differential Allows testing small parts volume difference
between test and reference volumes
SIGN
Sign Return opposite result
STAMPING
Stamp Pneumatic or electric output to identify the part
STD CONDITIONS
Standard conditions Standard conditions correction with parameters
SYNC. TEST
Synchro test A programmable input allows to pass from
Stabilization to Test phase
T+R TEST
Test and reference test Display which part has failed during a test with
two parts
TEMP.CORR. 1
Temperature correction Software temperature test part correction
TEST CHECK
Calibration check Calibration check by adding a volume at the end
of test time
UNITS
Units Access to International System or American or
Custom Units
VALVE CODES
Valve codes Available outputs for external automatism
Others functions are available depending on software version.
To Next Page
Loading...
Need help?
General
