ATEQ F6 Profinet Series - Configuration; General Configuration; Table of the Configuration; Extended Menus Bits

FG_F6_PROFINET_EN_04 / 2020-06-17
32 / 75
CONFIGURATION
General configuration
Table of the configuration / extended menus bits
Reminder: “h” indicates a hexadecimal code, “(d)” indicates a decimal code.
The bits below are mostly present in the CONFIGURATION or More functions... menus.
They are only used to allow the access to other parameters according to the configuration, depending
on the configuration, these are active or not.
Acronyms used in the “Menu” column:
— Conf: CONFIGURATION
— +Func: FUNCTIONS > More functions…
— RS232: CONFIGURATION > RS232
Word
Bit n°
Mask
Meaning
Menu
Hexa
Dec
1
0
0001
1
Permanent blowing activation.
Conf
1
0002
2
Reserved.
2
0004
4
Fill type.
+Funct
3
0008
8
Pre-fill type.
+Funct
4
0010
16
Recovery thresholds.
+Funct
5
0020
32
Cycle end.
+Funct
6
0040
64
Mini valve.
+Funct
7
0080
128
Peak meter.
+Funct
8
0100
256
Reserved.
9
0200
512
Reference volume.
+Funct
10
0400
1024
ATR 0.
+Funct
11
0800
2048
ATR 1.
+Funct
12
1000
4096
ATR 2.
+Funct
13
2000
8192
Program name.
+Funct
14
4000
16384
Chaining.
+Funct
15
8000
32768
Automatic connector.
+Funct