Overview Installation Use Maintenance Warranty
Product overview
1. Important recommendations
1.1. Safety instructions
Installation and service work on thermodynamic water heaters can be hazardous due to high pressures and
live parts.
Thermodynamic water heaters must be installed, commissioned and maintained by trained and qualified
personnel only.
1.2. Transport and storage
One side of the product can be tilted at 90°. This side is clearly indicated on the product packaging.
Tilting the product onto the other sides is prohibited. We recommend that you pay particular
attention to these instructions. We shall not be liable for any defect of the product resulting from
transport or handling of the product contrary to our recommendations.
2. Content of the packaging
Water heater
1 Condensate drain pipe (2m)
1 Instructions
1 Bag each containing a dielectric connection
with 2 seals to be installed on the hot water
connection
1 ground hook with screws
1 seal + 1 ¾" brass cap
1 valve to be installed on the cold water connection
(not to be used in France and Belgium)
4 adjustable feet
To Next Page
Loading...
