Atlantic 200L - MAINTENANCE AND TROUBLESHOOTING; User Maintenance and Servicing

72
Overview Installation Use
Servicing, Maintenance and Troubleshooting
The water heater ishould be drained if the absence mode cannot be used or when the appliance is switched
off. Proceed as follows:
1. Tips for the user.
The appliance must be switched off before opening the covers.
Maintenance Warranty
Cut the power supply.
Open a hot water tap.
Close the cold water inlet.
Open the drain tap of the safety
unit.
❶
❸
❷
❹
In order to maintain the performance of your water heater, you must regularly service your appliance.
2. Servicing.
By the USER:
What
When
How
Safety unit
Once or twice a month
Operate the safety valve.
Check that water is flowing correctly.
General condition
Once a month
Check the general condition of the appliance: No Error
code, no water leakage by the connections, etc.
By a PROFESSIONAL:
What
When
How
The ducting
Once a year
Check
that the water heater is connected to the ducts.
Check
that the ducts are positioned correctly and
not
squashed
.
Condensate flow
Once a year
Check
the cleanliness of the condensate drain pipe.
Electrical connections
Once a year
Check
that there are no loose wires in the internal
and
external
wiring and that all connectors are in place.
Electrical backup
Once a year
Check
that the electrical backup is working properly
by
means
of a power meter.
Scaling
Every two years
If
the feed water of the water heater is scaling,
descale
it
.