Atlas Copco Power Focus 600 - Thread Direction; Soft Start

EN Power Focus 600
22
© Atlas Copco Industrial Technique AB - 9836 4954 01
Thread direction
{ , : profile2 in element [iosection]}
Thread direction defines the tightening direction of the spindle to clockwise or
counterclockwise. The rotation of the spindle will always be in this direction,
except when loosening and during the conditioning step used in the Three step
strategy.
Parameter Description Default value
Thread direction Defines the tightening direction of
the spindle.
Clockwise
Soft start
The Soft start step enables setting of the target angle, speed, and maximum
torque to help the bolt to enter the thread, and to prevent the tool being jerked
out of position when the tool trigger is pressed.
Parameter name Description Default value
Soft start Enables setting of the tool’s speed,
angle and maximum torque to fa-
cilitate the bolt entering the thread.
Off: Soft start is turned off.
On: Soft start is turned on.
On
Speed Defines the speed during Soft start.
Angle Defines the target angle to turn the
spindle for the bolt to enter the
thread.
90°