EN Power Focus 600
4
© Atlas Copco Industrial Technique AB - 9836 4954 01
Socket selector
Socket selector is a socket tray with LED’s that can
be used to guide the user through, for example, a
Batch sequence. When using more than one Pset it is
very convenient to use a selector. When a socket is
lifted, the corresponding Pset will be selected.
The Socket Selector is available with four or eight
sockets, and communicates on the I/O bus.
Operator panel
Operator panel is an external device for the Power
Focus. It is a general purpose lamp- and switchbox,
replacing the customer specials that are made today.
The Operator panel communicates directly with the
Power Focus and the device configuration is made
through the controller HMI.
Stacklight
Stacklight ESL-04 is a flexible light and switch de-
vice designed to interface with controllers equipped
with an I/O Bus.
Stacklight DSL-03 is a simple and customizable light
and switch device, designed to interface with con-
trollers equipped with Internal I/O connectors instead
of I/O-bus.
The stacklight comes with features such as buzzer, ro-
tating light etc.
Scanner
Scanners are used to facilitate and automate the
process of assembly and selection of tightening pro-
grams.
Scanners can read a barcode or QR code and, based
on that information, select the appropriate batch se-
quence to use for that operation.
To Next Page
Loading...
