EasyManua.ls Logo

Atlas Copco SmartROC T45--10

Atlas Copco SmartROC T45--10
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SmartROC T45-10 4 Operation
25
4 Operation
4.1 StartupandShutdown
4.1.1TurningOnBatteryPower
Condition
p
Dailymaintenancehasbeencarriedout.
1.
Turnthebatteryisolationswitchaquarterofaturnclockwiseuntilthehandlestops.
4.1.2TurningOffBatteryPower
Thebatteryisolationswitchmustbeturnedoffoncethedieselenginehasstopped,after
finishingwork,orforlongtermstorage.
Condition
p
Thedieselengineisswitchedoff.
1.
Wait2minutesafterthedieselenginehasbeenswitchedoff.
NOTICE
FluidremaininginHosesafterShutdown
RiskofdamagetoDieselExhaustFluid(DEF)system.
u Alwayswait2minutesaftertheenginehasshutdownbeforeturning
offthebatteryisolationswitch.
2.
Turnthebatteryisolationswitchaquarterofaturncounterclockwiseuntilthehandle
stops.

Table of Contents

Related product manuals