Atlas Copco SmartROC T45--10

SmartROC T45-10 4 Operation
31
5.
Wait2minutesbeforeturningoffthebatteryisolationswitch.
NOTICE
FluidremaininginHosesafterShutdown
RiskofdamagetoDieselExhaustFluid(DEF)system.
u Alwayswait2minutesaftertheenginehasshutdownbeforeturning
offthebatteryisolationswitch.
4.1.8ActivatingtheWinchControlUnit
WARNING
UnintentionalManeuvering
Cancauseseriousinjuryanddamagetoproperty.
u Alwayshaveanoverviewofthedrillrigandthewinchcontrolunit.
u Neveroperatethewinchcontrolunitfromthedrillrigwhenthewinchisbeingused.
u Alwaysdeactivatethewinchcontrolunitwhennotinuse.
1.
Setthemodeselectorontheoperationpanelintheremotemode .
2.
PressandholdtheONbutton onthewinchcontrolunituntiltheindicationlights
flashonce.
3.
Pressthebuttonforcabin/remotecontrolunit onthewinchcontrolunit.
è
Theindicatorlightcomesonwhenthewinchcontrolunitandthereceiverunit
onthedrillrighaveradiocontact.
4.1.9DeactivatingtheWinchControlUnit
WARNING
UnintentionalManeuvering
Cancauseseriousinjuryanddamagetoproperty.
u Alwayshaveanoverviewofthedrillrigandthewinchcontrolunit.
u Neveroperatethewinchcontrolunitfromthedrillrigwhenthewinchisbeingused.
u Alwaysdeactivatethewinchcontrolunitwhennotinuse.
1.
Pressthebuttonforcabin/remotecontrolunit onthewinchcontrolunit.
è
Theindicatorlightgoesoff.
2.
PresstheOFFbutton toswitchoffthewinchcontrolunit.