Atlas Copco SmartROC T45--10

SmartROC T45-10 4 Operation
28
ReCirculationValveforPreheating
ReCirculationvalveforpreheating
Thereisarecirculationvalveunderthefronthatchonthelefthandsideoftherig.When
thetemperatureisbelow0°therigmustbestartedwiththerecirculationvalveopen.
Whentherighasreachedoperatingtemperaturetherecirculationvalvemustbeclosed.
Therecirculationvalvemustbeclosedinorderfordrillingtowork.
4.1.5ParticleFilterRegeneration
Regenerationcleansestheparticlefilteroftheexhaustsystem.Innormalconditions,re
generationstartsautomaticallyanddoesnotaffecttheperformanceofthemachine.
WARNING
VeryHighExhaustTemperatures
Cancauseseriouspersonalinjuryanddamagetoproperty.
u Parkthemachineintheopenairduringregeneration.
u Nevercovertheparticlefilter.
u Neverletflammablematerialscomeincontactwiththeparticlefilter.
Whenregenerationisinprogress,thesymbolHighExhaustTemperatureisshownasa
warninginthemenustatusbar.
SymbolIndicatingthatForcedRegenerationisRequired
Whenthesymbolforforcedregenerationisshowninthemenustatusbar,aforcedregen
erationmustbestarted.
TheremaininghoursuntilthenextautomaticregenerationisshowninmenuEngine.This
symbolappearswhenthecountershowinghourstonextregenerationindicateszeroanda
forcedregenerationisrequired.