Atlas Copco SmartROC T45--10

SmartROC T45-10 4 Operation
46
9.
Threadtherockdrillfullyintothedrillrodsleeve .
DANGER
RotatingParts
Willcauseseriousinjuryordeath
u Neverholdthedrillrodduringrotation.
10.
Runtherockdrillupwiththedrillroduntiltherockdrillstopswiththethreadinsidethe
upperdrillsteelsupport .
11.
Opentherodhandlinggrippersandmoveouttherodhandlingarmstogripthedrill
steel + .
12.
Releasethebutton .
è
Thegrippersclose.
13.
Releasetheleftlevertotheneutralposition.
è
Thegrippersadoptloosegrip.
14.
Runtherockdrilluptothepositionforinsertingtocarousel .
15.
Activatehardgrip .
16.
Activateunthreading .
17.
Insertthedrillrodintothecarousel whentherockdrillhasbeenunthreadedfrom
thedrillrod.
18.
Rotatethecarouselclockwise .
19.
Openbothdrillsteelsupports + .
20.
Repeattheprocedureuntiltherequirednumberofdrillrodsareinthecarousel.