- 104 -
MAINTENANCE UNDERCARRIAGE
TANDEM EU
Towing eye
Lubricate the towing eye with commercial lubrication
grease. The towing eye has to be slightly greased at all
times in order to prevent increased wear and tear.
Check the towing eye for wear and tear. Wear and tear
of towing eyes with a nominal diameter of 50 mm is
restricted to a maximum of 2.5 mm. If this value is
exceeded the worn bush of the towing eye has to be
exchanged.
Support leg lubrication point
Prior to lubrication please clean the lubrication nipple
(1) with a clean cloth. For lubrication purposes use
commercial vehicle grease. Lubricate the tow bar
using a grease gun on the lubrication nipples.
Lubrication point of folding supports
Prior to lubrication please clean the lubrication nipple
(1) with a clean cloth. For lubrication purposes use
commercial vehicle grease. Lubricate the folding
supports using a grease gun on the lubrication nipple.
Inspections and repair of the axles have
to be performed by a skill level 2 truck
work shop mechanical technician
according to applicable local
regulations.
Inspections, adjustment and repair of
the brake system have to be performed
by a skill level 2 truck work shop
mechanical technician according to
applicable local regulations.
To Next Page
Loading...
Need help?
General
