- 47 -
Pull the red button (1) until it snaps into its place.
Release the support lock (1), turn the support leg
vertically and secure it.
Undo the latch (2) and lower the support leg using the
crank (3). Lock the crank with the latch.
Release the support lock (1), turn the support leg
vertically and secure it.
Take out the locking pin (2) and lower the support leg
as far as possible. Lock the support leg with the pin
and secure it with the hairpin spring (3).
Only operate the parking brake when it
is cold.
Using the parking brake when the
brakes are overheated may create
tension fields on account of different
cooling down speeds which may cause
damage to the brake discs. High
temperatures may result in the brake
pads getting stuck. Subsequent release of
the brakes may result in the brake pads
being ripped off.
To Next Page
Loading...
Need help?
General
