- 81 -
Notes
Maintenance schedule (hrs)
(continuation of page 80)
Daily 50 hrs
after initial
start-up
Every
250 hrs
Every
500 hrs
Every
750 hrs
Every
1000 hrs
Every
2000 hrs
Yea rly
Analyse coolant (4) (8) x
Check/Replace safety cartridge x
Check/Clean diesel particulate filter (2)
(to be continued on page 82)
1. More frequently when operating in a dusty environment.
2. Refer to engine operation manual.
3. After a day’s work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section Oil specifications.
8. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing
points:
• 2913 0028 00 : refractometer
• 2913 0029 00 : pH meter.
9. See section Safety valve.
10. See section Before starting.
11. Replace all rubber flexibles every 6 years.
For other specific engine and alternator requirements refer to specific manuals.
12.Samples to be obtained/analysed every 500 hours, starting at 250 hours. (250, 750, 1250,...)
Keep the bolts of the housing, the lifting
eye, the towbar and the axle securely
tightened.
Refer to section Technical specifications
for the torque values.
To Next Page
Loading...
