2-10
ITEM
NO.
INTER-
VAL
LOCATION
PROCEDURE
NOT FULLY
MISSION
CHECk/
SERVICE
10 Before/
After
Viewed Image
NOTE
Refer to paragraph 2.2.3. to inspect for op-
erational defects.
Flickering, flashing,
edge glow, or shad-
ing is observed.
11
Before/
After
HEADMOUNT
Straps/Pads
NOTE
system.
Inspect for cuts, tears, fraying, holes,
cracks, or defective fasteners.
D a m a g e c a u s e s
straps or pads to be
unserviceable.
12 Before/
After
Socket Inspect for dirt, dust, or corrosion.
Insert monocular latch into socket to verify
secure attachment of monocular to head-
mount. If necessary, clean socket with
water.
D a m a g e d , l a t c h
won’t lock or is too
loose.
To Next Page
Loading...
