2-11
ITEM
NO.
INTER-
VAL
LOCATION
PROCEDURE
NOT FULLY
MISSION
CHECk/
SERVICE
13 Before/
After
Eye Relief
Adjustment
Press the eye relief adjustment and check
for free motion. Inspect for damage.
Binding, damaged or
non-operational slide
mechanism.
14 Before/
After
HELMET MOUNT
Straps
Inspect for cuts, tears, fraying, holes,
cracks, or defective fasteners.
D a m a g e c a u s e s
straps to be unser-
viceable.
15 Before/
After
Socket Inspect for dirt, dust, or corrosion.
Insert monocular latch into socket to verify
secure attachment of monocular to helmet
mount. If necessary, clean socket with wa-
ter.
D a m a g e d , l a t c h
won’t lock or is too
loose.
16 Before/
After
Fore-and-Aft Ad-
justment
Press the 2 side buttons on plastic mount
or depress side lever on metal mount and
check for free motion.
Inspect for damage.
Binding, damaged or
non-operational slide
mechanism.
17 Before/
After
MOUNTING
ADAPTERS
Headmount/
Helmet Mount
Adapter
Inspect for dirt, dust or corrosion.
Insert into headmount or helmet mount
socket to verify secure attachment.
Damaged, will not
latch securely.
To Next Page
Loading...
