EasyManua.ls Logo

ATN PVS-14 - Helmet Mounted Operation

ATN PVS-14
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-36
NOTE


(7) Rotate the diopter adjustment for the clearest view of the image
intensifier screen.
NOTE
        
diopter.
(8) Adjust the eye relief distance by pressing the eye relief adjust-
ment and sliding monocular fore or aft to obtain a full field-ofview
of the image. Reset the diopter adjustment for best image.
(9) Adjust the objective lens focus (Figure 2.1.) while observing an
object until the sharpest image is obtained.

CAUTION

          
-
         
helmet mount.
CAUTION
-

helmet mount adapter.
           
attached to it.

       -
cant stress on the helmet mount.


helmet screws.
Perform the following procedures for helmet mounted operation.

Table of Contents

Related product manuals