MAN - Pyrolytic Oven - REV: Original | H. Maintenance34
b. Empty the catch tray in the bottom of the oven (into oor sweeps).
6. Clean Electronics Cabinet
a. Vacuum out any areas in the electronics cabinet that appear dirty.
Every Twelve Months
Perform the 6 month steps, plus:
1. Replace catalyst trays
a. Discard the old trays containing the catalyst and replace them with a new ones.
b. Order replacement catalyst trays.
H.7 Spare Parts List
The following should be kept on hand for regular maintenance:
• Tray, Stainless Steel, Catalytic, QTY 1
• Thermocouple, Oven Control Type K, QTY 1
• Thermocouple, Oven Hi-Limit Type K, QTY 1
• Thermocouple, Oxidizer Control, Type K, ¼” by 6” long, 36” leads, QTY 1
• Gasket, Door Replacement, Hi-Temp, QTY 1**
Part No. Description
XXXXXXX Gasket, Door Replacement, Hi-Temp, 78”
XXXXXXX Gasket, Door Replacement, Silicone, 88”
XXXXXXX Thermocouple, Oven Type K
XXXXXXX Heater Elements, Model 3 Oven
Part No. Afterburner (Oxidizer) Parts
XXXXXXX Heater Element, 1060 watts (uses 2)
XXXXXXX Catalyst, Ceramic Honeycomb, 5” Dia by 2”