55Listening to the radio
ControlsCommunicationNavigationEntertainment
Select and confirm the desired memory posi-
tion.
2
Displaying the radio text (FM, DAB*)
Additional information as a supplement to
the normal pr
ogramme is displayed.
3
Tuning to previous/next station
The system will select the pr
evious or next
available frequency. Or: Move the ON/OFF
button to the left/right (
/
).
4
Setting the frequency manually (FM,
AM)
The fr
equency bar will appear. Select and con-
firm the desired station frequency.
5
Freezing/releasing station names
(FM)*
The curr
ent name of the selected station will
be frozen in the memory list and marked with
the symbol
A
ð page 54, Fig. 46. Changing
station names ar
e not displayed. To release
the station name, select and confirm Freeze
station names again.
6
Displaying the slide show (DAB*)
Additional information as a supplement to
the normal pr
ogramme (such as images from
the studio, current photographs of artists or
covers of music albums) is shown if available.
7
Displaying the programme guide (EPG)
(D
AB*)
If available, an overview of the radio stations
within reception range and the current and
following radio programmes will be shown.
Select and confirm a radio programme. De-
tailed information on the radio programme
will now be displayed.
8
Info box
Depending on whether it is a
vailable, informa-
tion on the selected station (e.g. station
name, ensemble, type of programme etc.) will
be shown.
9
Memory list
The memor
y list can contain up to 50 stations
from all wavebands.
– To store a station: Select control button
Memory > station name store. The selected
station will appear at the next free position
in the memory list. Select and confirm the
desired memory position.
– To tune to a stored station: Press control
button Memory. Now you can select a sta-
tion from the memory list and confirm it.
– To move a stored station: Press control but-
ton Memory. Select and the station in the
memory list and then select station name
move. Select and confirm the desired mem-
ory position.
Other settings
►
Select:
R
ADIO
button > control button Set
-
tings.
Depending on the waveband setting (FM, AM
or DAB*), you can select the following func-
tions:
Sound settings
Refer to
ð page 29
.
Announcements*
Traffic programme (TP): Traffic announce-
ments can be received via FM and played by
the system irrespective of the selected wave-
band. The function DAB and FM can be used
to have the system play traffic announce-
ments from both wavebands while the DAB*
waveband is selected. If, for example, no traf-
fic announcements are available from the se-
lected DAB* station, these are received in the
FM waveband. The display of the TP symbol
8
ð page 10, Fig. 6
shows you whether the tr
af-
fic programme is switched on
ð table on
page 56
.
DAB announcements: When the DAB an-
nouncements are on, information on the se-
lected station (e.g. news or weather informa-
tion) is played.
To Next Page
Loading...
Need help?
General
