48 Navigation
Entering a destination via the
coordinates
Applies to vehicles: with na
vigation system
►
Select:
NA
V
button > control button Desti-
nation > Address > Coordinates.
►
Select and confirm the Latitude and Longi-
tude coor
dinates. Start the route guidance
function.
Entering a stopover/tour plan
Applies to vehicles: with na
vigation system
You can enter up to nine stopovers directly in
the tour plan or using the various ways of en-
tering destinations.
Fig. 41
Tour plan
Important: You must have entered a destina-
tion ð
page 45.
►
Select:
NAV
button > control button T
our.
– To enter a destination as a stopover: Select
and confirm the symbol for entering a stop-
over
2
ð Fig. 41. Enter a destination
ð
page 45. Select and confirm Set as stop-
over in the Destination details menu.
– To change a tour plan: Press the control
button for Tour. Select and confirm the des-
tination/stopover and then select Change,
Move, Delete or Start tour plan from here.
– To store a tour plan: Press the control but-
ton for Tour. Select and confirm Tour mem-
ory and then Store tour plan. Enter a name.
– To load/delete a tour plan: Press the control
button for Tour. Select and confirm Tour
memory and then Load tour plan/Delete
tour plan.
The following information is displayed in the
legend menu of the tour plan ð Fig. 41:
Location of the vehicle
Symbol for entering a stopover
Stopover enter
ed
Destination
Starting/stopping
r
oute guidance
Applies to vehicles: with navigation system
– To enter a new destination and start route
guidance: Select
NAV
button > control but-
ton Destination >
enter destination
> Star
t
route guidance.
– To restart/stop the last route guidance: Se-
lect
NAV
button > control button Destina-
tion > Star
t/Cancel.
When you enter a new destination, the follow-
ing additional functions are available in the
Destination details menu
ð page 46, Fig. 39
:
Calculate alternative routes: Three suggested
routes are calculated for the destination cur-
rently entered. The legend menu will show in-
formation on the alternative route, such as
the distance to the destination and the calcu-
lated arrival time.
Enter special destination in town: With this
option you can look for e.g. tourist attractions
or public buildings (hospital, cinema, recrea-
tion areas, etc.) in the vicinity of the town en-
tered. The special destination can be set di-
rectly as the destination.
Select centre: The navigation system calcu-
lates a route leading to the centre of the se-
lected town/district.
Destination on map: The destination is shown
on the map.
1
2
3
4
To Next Page
Loading...
Need help?
General
