Need help?Do you have a question about the Audi RNS-E and is the answer not in the manual?
General| Display Size | 6.5 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Navigation System | Yes |
| GPS Receiver | Integrated |
| TMC | Yes |
| MP3 Playback | Yes |
| Map Updates | Via DVD |
| Audio Formats | MP3, WMA |
| Compatibility | Audi A3, A4, A6, TT, R8 |
| Voice Control | Optional |
| SD Card Slot | 2 SD card slots |
| Map Data | DVD-based |
| CD/DVD Drive | Yes |
| Bluetooth | Optional |
| Connectivity | Optional |
| Audio | Integrated |
Introduces the controls and functions of the navigation system's main unit.
Provides crucial safety and operational advice for using the navigation system.
Explains the role of function buttons in determining the main functions shown on the display.
Explains how the multi-function steering wheel enables quick operation of navigation system functions.
Details functions like track selection, volume adjustment, and reverse using the steering wheel buttons.
Guides on entering digits, letters, and characters using the speller interface.
Details the CD changer, including glove compartment and trunk units.
Describes the DVD drive's capability to read navigation DVDs, audio CDs, and MP3 CDs.
Provides step-by-step instructions for inserting the navigation DVD into the drive.
Guides on how to load MP3 CDs and audio CDs into the DVD navigation drive.
Details compatible memory card capacities, formatting, and file naming for MP3s.
Provides instructions for loading single CDs, all CDs, or into specific slots.
Explains how to eject individual CDs or all CDs from the changer.
Details the procedure for removing and inserting the CD magazine from the changer.
Provides instructions for handling navigation DVDs, including cleaning and storage.
Details how to navigate the main radio menu and its submenus.
Describes how to select the frequency band for receiving radio stations.
Explains the dynamic FM station list and how to select stations.
Details the static AM station list and how to update it.
Explains how to save up to 30 stations from all frequency bands into the memory list.
Guides on selecting a station and saving it to a memory location.
Details how to select a saved station from the memory list.
Explains how to set and save even weak stations using manual settings.
Describes how to start automatic frequency search for receivable stations.
Details how to adjust selectivity for the automatic seek function (local/distant).
Guides on deleting individual stations from the memory list.
Details how to adjust sound settings like Balance, Fader, Treble, and Bass.
Explains the DSP function, including GALA levels for speed-dependent volume adjustment.
Describes how dynamic noise compensation automatically adjusts music playback to ambient noise.
Guides on entering names and additional data fields for new directory entries.
Details how to set navigation destinations (business/personal) within directory entries.
Details how the system uses satellites (GPS) for position and route calculation.
Explains how route guidance is provided visually and acoustically.
Details how route guidance information is displayed in the instrument cluster.
Explains how to reset system settings to default values.
Provides solutions for common system issues like non-responsiveness or display problems.
To Next Page
