S e lections and settings
- Press the rocker switch @ to reach a menu display. The
switch is operated the same as the display (up/down).
Entering and confirming
- Press the [Rese t ] button @ .
Re tu rning to th e Sta rt menu
Press the [Reset] button longer than 2 seconds to return
from any menu level to the Start menu .
Using the rocker switch, you can select the menus in the d isplay or
change settings . A cursor appears on the left in front of the selected
values.
By pressing the [ Reset] button, you activate the selection you made
or confirm the values you set.
Selected functions are identified with
a check mark or are carried out directly .
Mean ings of the symbols in the display :
Selection bar
>
./
D
-
Selected funct ion
Cursor
Check mark
Box
Triangle pointing up
Mean ing
Current Selection
Selected or Function
active
Not selected
Prev ious page
Triangle pointing down Next page
_______ .. _________ ,. _________ _
Dri v er inform a tion syst e m
Selecting settings
The Driver Information System settings are menu -
guided.
Select your settings as follows :
Fig. 16 Display: Menu
Sett ings, compute r
sele cted (page 1)
- Press the [Reset] button. The Start menu appears
~
page 23 , fig . 13.
- Press the rocker switch until Set is displayed.
- Press the
[Reset] button. All the menus appear.
- Press the rocker switc h until the desired line is highlighted
(cursor)
~
fig . 16.
- Press the
[Reset] button .
- If necessary, scroll by selecting and activating the symbol
for "Next page" or "Previous page".
When you have selected the Computer menu and activated it by
• pressing the [ Reset] button , two computer levels appear (computer
1 and computer 2). Now you have to select the level you want using
the rocker switch and act ivate it with the
I Reset] button. •
Cont rols and equip-
ment
Vehicle OP-eration Vehicle care Do-it-yourselt service iTechnical data
To Next Page
Loading...
