EasyManua.ls Logo

Audi TT 2010 - Page 97

Audi TT 2010
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 second with the brake pedal not depressed, the selector lock
engages automatically.
Rele as e button
The release button in the se lector lever handle prevents accidental
shifts into certain selector lever positions . When you press the
re lease bu t ton, the selector lever lock is cancelled. In the illustration,
the positions in which the release button has to be pressed are h igh -
lighted in color =>
page 94, fig . 84.
Igniti on key re mo va l l oc k
The ignition key can only be remove after the ignition is switched off
if t he selector lever is in P. As long as t he ignition key is removed, the
selector lever is locked in P.
(I] Tips
If the selecto r lever does not engage, there is a ma lfunction . The
engine is disabled to prevent the veh icle from driving off unintention-
ally. To allow the selector lever to engage again, proceed as follows:
Press and release the brake pedal.
Driving Notes
The forward gears are shifted up or down automatically .
Cont rols and equip-
ment
Fig. 85 Sect ion from
center conso le:
Sele ctor lever with
release button
Vehicle OP-eration
Transmission
Starting from stop
- Step on and hold the brake pedal.
- Hold the release button (button in selector lever) down,
move the selector lever to the desired position, for
example D =>
page 93, and release the button.
- Release the brake pedal and accelerate=> & .
Stopping tempor a rily
- Bring the vehicle to a full stop with the brake, e.g . at
traffic signals.
- Do not accelerate.
Parking
- Step on and hold the brake pedal =>& .
- Apply the parking brake firmly .
- Hold the release button down, move the selector lever to
P and release the button .
Stopping on an incline
- Always hold the vehicle with the footbrake or parking
brake in order to prevent "rollback" =>& . Do
not try to
prevent the vehicle from rolling back by rewing the eng ine
while it is in gear.
Starting on a hill
- Apply the hand brake firmly .
- With the engine in gear, gradually accelerate and release
the hand brake . .,
Vehicle care Do-it-yourselt service iTechnical data

Table of Contents

Other manuals for Audi TT 2010

Related product manuals