EasyManua.ls Logo

Audi TT 2012 - Safety Belts

Audi TT 2012
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
damaged, have belts replaced by an au-
thorized Audi dealer or qualified
workshop .
- Safety belts that have been worn and
loaded in an accident must be replaced
with the correct replacement safety belt
by an authorized Audi dealer or qualified
workshop . Replacement may be necessa-
ry even if damage cannot be clearly seen.
Anchorages that were loaded must also
be inspected .
- Never remove, modify, disassemble, or
try to repair the safety be lts yourself.
- Always keep the belts clean . Dirty belts
may not wo rk properly and can impair
the function of the inertia reel
¢ page 176, Safety belts.
Safety belts
Fastening safety belts
Seat first - everybody buckle up!
Fig. 108 Belt buckle and tongue on the d river's seat
To provide maximum protection, safety belts
must always be positioned correctly on the
wearer 's body .
.. Adjust t he fron t seat and head restraint
properly
c::> page 57, General recommenda -
tions .
.. Hold the belt by the tongue and pull it
evenly across the chest and pelvis ¢
&-
.. Insert the tongue into the correct buckle of
your seat until you hear it latch securely
¢ fig. 108 .
.. Pull on the belt to make sure that it is se-
curely latched in the buckle .
Safety belts 10 7
Automatic safety belt retractors
Every safety belt is equipped with an automat-
ic be lt retractor on the shoulder belt. This fea-
ture locks the belt when the belt is pu lled out
fast, during hard braking and in an accident.
The belt may also lock when you drive up or
down a steep hill or through a sharp curve.
During normal driving the belt lets you move
freely .
Safety belt prete nsioners
The safety belts on the front seats are equip-
ped with a belt pretensioner that helps to
tighten the safety belt and remove slack when
the pretensioner is activated. The function of
the pretensioner is monitored by a warning
light ¢
page 16 .
Switchable locking feature
Every safety belt except the one on the driver
seat is equipped with a switchable locking fea-
ture that
must be used when the safety belt is
used to attach a child seat. Be sure to read the
important information about this feature
c::>page 143.
_&. WARNING
Improperly positioned safety belts can
cause serious injury in an accident
c::> page 108, Safety belt position.
- Safety belts offer optimum protection
only when the seatback is upright and
belts are properly positioned on the
body.
-
- Never attach the safety belt to the buck-
le for another seat. Attaching the belt to
the wrong buckle will reduce safety belt
effectiveness and can cause serious per-
sonal injury.
- A passenger who is not properly restrain-
ed can be seriously injured by the safety
belt itself when it moves from the stron-
ger parts of the body into critical areas
like the abdomen .
- Always lock the convertible locking re-
tractor when you are securing a child
seat in the vehicle ¢
page 145.

Table of Contents

Related product manuals