EasyManua.ls Logo

Audi TT 2012 - Wha T Shou Ld I be Aware of When

Audi TT 2012
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
~
Move the switch @ c> fig . 165 on the elec-
tric air pump
ll to position I. After 5 mi-
nutes, t ire pressure must have reached at
least 1.8 bar.
~
Switch t he electric a ir pump off - switch in
pos ition
0 . If the requ ired tire pressure of at
least 1.8 bar has not been reached, it is not
poss ible to make a repa ir with the tire seal-
an t . Seek professional ass istance.
Disassembling Tire Mobility System
~
Remove the hose from the valve and pu ll
the plug out of the socket.
~
Screw the dust cap onto the valve .
~
Place the empty sealant bottle bac k in the
origina l packag ing and clip it in place unde r
the floor so that no tire seal ant ca n run out
into the vehicle.
~
Place the electric air pump in the luggage
compartment for the time being .
~
Start driving right away so that the sea lant
is d ist ributed in the tire .
A WARNING
- Follow the manufacturer's safety instruc -
t ions on the deca l for the air pump and
the sea lant bott le .
- If a t ire pressure of 1.8 bar cannot be
achieved after pump ing for 5 m inutes,
the tire is too severely damaged. Do not
contin ue to drive.
- Seek profess ional assistance if it is not
poss ible to repair the tire with the tire
sealant.
(D Tips
- Do not operate the electric a ir pump for
more than 8 minutes without stopping,
otherwise it can ove rheat. When the air
pump has cooled down, you can con t inue
to use it.
- If sealant has escaped, allow it to dry,
then you can peel it
off.
l ) The electr ic air pump shoul d never run fo r longer than
8 minutes.
What do I do now? 225
Final check
Appli es to vehicles: w ith Tire Mob ility System
After driving for a short distance, tire
pressure must be checked
~
After driving for about 10 m inutes , stop
and check the tire pressure .
~
If tire pressure is sti ll at least 1.3 bar, in-
flate t he tire to specified press ure (see driv-
er's side B-pillar), drive to the next repa ir
shop and have the tire and the sealant bot-
tle replaced.
~
If tire pressure is less than 1.3 bar, the t ire
is too severely damaged. Do not cont inue to
drive . Seek professiona l assistance.
A WARNING
If t ire press ure is less than 1.3 bar after
driving for 10 minutes, the t ire is too se-
verely damaged . Do not contin ue to drive .
Seek professional assistance .
(D Tips
After a tire repair, have the sealant bottle
replaced at a dealership . This restores full
funct iona lity to the Tire Mobility System.
What should I be
aware of when
changing a tire?
General information
The following sect ions will provide you with
important information on how to change a
tire using the vehicle tool kit .
-
However, we recommend that you have a
qualified service center change the tire and
perform all work associated with chang ing it.

Table of Contents

Related product manuals