cursor appears on the left in front of these-
lected values.
By pressing t he
I Reset I but t on, you act ivate
the select ion you made or confirm the values
you set .
Selected functions are identified with
a check mark or are carried out directly .
Meanings of the symbols in the display:
Se lee- Selected tune- Meaning
t ion t ion
bar
>
Cursor Current Selection
./
Check mark Selected or Fune-
tion act ive
D
Box Not selected
•
Triangle point- Previous page
ing up
T
Triangle point- Next page
ing down
Selecting settings
The Driver Information System settings are
menu -guided.
Fig. 14 Display: Menu Settings , computer selected
(page 1)
Select your settings as follows:
.,. Press the
!Reset I button. The Start menu
appea rs
¢ page 25, fig. 11 .
.. Press the rocker switc h until Set is dis-
played .
.. Press the
I Reset I button . All the menus ap-
pear .
.. Press the rocker switc h until the des ired line
is highlighted (cursor)¢
fig. 14 .
.,. Press the !Resetl button .
Dr iv er in f ormation system 2 7
.. If necessa ry, scroll by selecting and activat -
ing the symbol fo r "Next page" or "Previous
page".
When you have se lected t he Compute r me nu
and activated it by pressing the
I Reset I but-
ton, two computer levels appear (computer 1
and computer 2). Now you have to select the
level you want using the rocker switch and ac-
tivate it with the
I Reset ! button.
Engine oil temperature
display
Applies to vehicles: wit h engine temperature contro l dis-
play
Fig. 15 Display: eng ine oil temperat ure display
.. With the ignit ion switched on, press the
N
0,
2!
a.
.,
a,
I RESET I butt on c!;> page 25, fig. 10 repeated -
ly unt il the engine oil temperature display is
shown .
The eng ine has reached its operating t em per-
ature when the engine oil temperature is be-
tween
176 °f (80 °C) and 248 ° f (120 °C) un-
der normal driving conditions. The engine oil
temperature may be higher if there is heavy
engine load and high temperatures outside.
This is not a cause for concer n as long as the
• c!;> page 16 or II r::!;> page 20 warning light
in the disp lay does not flash .
To Next Page
Loading...
