EasyManua.ls Logo

Audi TT 2012 - Speed Warning System

Audi TT 2012
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If timing is paused, you can continue it later
even if you switch the ignition
off .
Evaluating times and continuing or
resetting timing
App lies to vehicles: with lap timer
You con evaluat e the fastest, slowest and
overage lop times.
LAP 5
+ 45:12.9
59:08.8
0 s1:10.0
Fig. 23 Display: lap t ime evaluat ion
.,. To evaluate lap times, press and hold the
I RESET page 30, fig. 21 @ button for ap-
proximate ly 2 seconds. The d isp lay shows
the fastest lap"+", the slowest lap"-" and
the ave rage lap time "0" .
.,. To continue timing for additional laps, press
the wiper switch @ .
.,. To reset the timer to zero, press and hold
the
I RES ET I button again for approximately
2 seconds.
.,. To sw itch the lap timer
off completely,
press the
I RESET I button briefly .
(D Tips
- Saved lap t imes cannot be ind ividually
deleted from the total results .
- The saved lap timer values will not be
lost after turn ing the ignit ion off .
Speed warning system
Overview
The speed warning system helps you to keep
your driving speed below a set speed limit.
The speed warning system warns the driver if
he exceeds a previously stored maximum
speed. A warning tone will sound as soon as
the vehicle speed exceeds the set speed by
Dr iver in f ormati o n sys tem 3 1
about 3 mph (3 km/h) . At the same time, a
warning symbol appears in the display.
The speed wa rning system ha s
two warning
thresholds
that function independently of
each other and that have somewhat different
purposes :
Speed warning 1
You can use speed warning 1 t o set the maxi-
mum speed while you are dr iving. This setting
will rema in in effec t until you turn
off the ign i-
tion, assuming that you have not changed or
reset the setting.
The speed warni ng symbol
lllH (USA models)/
raj (Canada models) in the warning 1 d isp lay
appears when you exceed the maxim um
speed. It goes out when the speed falls be low
the stored maximum speed .
The speed warn ing symbol will also go out if
the speed
exceeds the stored maximum speed
by more than about 25 mph (40 km/h) for at
least 10 seconds. The stored max imum speed
is deleted.
Setting speed warning 1
¢ page 32.
Speed warning 2
Stor ing warning 2 is recommended if yo u al-
ways
want to be reminded of a cer t ain speed,
for exa mple whe n you are t rave ling in a coun-
try that has a genera l maxim um speed limit ,
o r if you do not want to exceed a specified
speed for winter tires.
The speed warn ing 2 symbol
lmil:J rusA mod-
els)/
laJ (Canada mode ls) appears in the dis-
play when you exceed the stored speed limit .
Unlike warning 1, it will not go out unt il the
vehicle speed drops be low the stored speed
limit.
Setting speed warning 2
¢ page 32 .
(D Tips
Even though your vehicle is eq uipped with
a speed warn ing system, you sho uld still
watch the speedometer to make sure you
are not driving faster than the speed limit .

Table of Contents

Related product manuals