Audient iD4 User Manual

16
Microphone Preamplifier
& Line Input
iD4 features an Audient Console microphone
preamplifier. This preamp is based on designs
from Audient’s classic consoles and are the
same that are used across our entire product
range.
The design features discrete, Class-A circuitry
providing exceedingly low distortion and noise
performance. From a sonic point of view, iD4
is fast, open and detailed.
• Amphenol™ XLR/TRS Jack combi-
connectors provide microphone and line
inputs in one compact connector.
When using a condenser microphone you will
need to use phantom power otherwise you
will not get any signal. To activate phantom
power, press the +48V switch next to the input
connector. The +48V phantom power indicator
LED will illuminate red when phantom power
is activated.
The microphone preamplifiers feature:
• 58 dB of clean gain
• 48v (±4V) phantom power rated at
10mA
• > 2.8kΩ input impedance which
provides a punchy tone from any
microphone type

Audient iD4 Specifications

General

Type	Audio Interface
Mic Preamps	1
Connectivity	USB
A/D Resolution	24-bit/96kHz
Bus Powered	Yes
Direct Monitoring	Yes
Headphone Output	1 x 1/4"
USB	USB 2.0
Computer Connectivity	USB
Analog Outputs	2 x 1/4" (main out)
Phantom Power	+48V (switchable)
Simultaneous I/O	2 in / 2 out
OS Compatibility	Windows, macOS
Driver	ASIO, Core Audio
Weight	0.88 lbs (400 g)